Why and How To Flush Your Water Heater
Maintaining your water heater is an essential part of responsible homeownership. Diminish the odds of suffering a costly repair bill or, even worse, needing to replace your system entirely by taking time out to care for yours.
Besides preventing an untimely demise, conducting periodic flushes:
- Reduces noise
- Improves speed
- Lowers energy costs
- Cleans out sediment
- Prevents foul odors associated with stagnant water
Performing a water heater flush need not be complicated or take long. Periodically executing this chore assures your appliance can continue reliably providing your household with clean, hot water well into the future.
How To Flush
First, switch off your machine. If your heater runs on gas, double-check that the pilot has been extinguished before continuing. For an electric water heater, access the circuit breaker to execute a complete shutdown.
Next, screw your garden hose onto the drain valve and place the loose end where you do not mind the evacuating water and sediment being deposited. Remember that wearing protective gloves during this stage is a wise decision.
Draining can now take place. Open the valve and let everything flow. Once a few minutes have passed, speed up the drainage by turning on the hot water in your kitchen. Wait some more and then switch the supply valve back to on until the flow completely halts. A quick, secondary flush is typically recommended.
With the old water completely expelled, you can once again activate your water supply. When your kitchen’s faucet is running smoothly and consistently, you will know the job has been completed properly. After confirming that the tank has refilled, restore power to the unit. The only task left is to turn on the heat source.
Needing a water restoration cleanup service to rush to your residence in Churchville, PA, and repair the fallout of a destroyed water heater can be entirely avoidable. Thankfully, with just a few, quick steps you can lower the possibility of such a calamity occurring.